Daily Notes of a solid wood door, do not hang on the door too heavy items, avoid sharp objects bump, scratch. When opening or closing the doors, do not use too much force, do not hit solid wood doors. 2. Do not open the door with wet hands, or the solvent contain corrosive ingredients splashed on solid wood doors and locks. When open the door or turn the door handle, do not use excessive force. Hinges, door locks and other hardware accessories regular activities, occurs immediately tighten loose. Door open when not working, you can add the right amount into the key hole in the foam, such as pencil lube lubrication. 3. Wipe the glass, do not let the cleaning agent or water to seep inside the glass bead gap to avoid the pressure of the deformation. Do not use excessive force when wiping the glass, the glass in order to avoid personal injury. Glass breakage after a large bump, be sure to maintenance professionals. 4, clear wood door surface stains (such as fingerprints), after the Kazakh gas can get wet, wipe with a soft cloth, hard cloth easy to scratch the surface. Heavy stains can use neutral detergent, toothpaste or special cleaning agent, wipe clean immediately after decontamination. 5, when the dust cleared on solid wood doors, vacuum cleaner can be cleared. Solid wood doors at the edges do not often friction facing material edges and corners to avoid damage to fade. 6, remove surface stains wood doors (such as fingerprints), after the Kazakh gas can get wet, wipe with a soft cloth, hard cloth is easy to scratch the surface. Heavy stains can use neutral detergent, toothpaste or special cleaning agent, wipe clean immediately after decontamination. 7, stucco walls, solid wood doors to be covered. Avoid wood door facing material peeling lead paint coatings, fade, affect the overall appearance. 8, while other types of construction (eg floor installation, etc.) need to be taken to avoid bruising the doors of the construction workers. 9, when the furniture needs to pay attention to the handling process approach to avoid furniture and door knocking. 10, decoration requiring regular ventilation and sunlight partially completed before the doors of the shelter stay, avoid prolonged direct sunlight cause yellowing paint or excessive humidity caused by the temperature difference between the doors of deformation. 11, in case the doors paint bump, damage, promptly contact and aftermarket manufacturers send professionals to repair.